Twill Weave mesh

Twill Weave mesh

Each weft wire passes over two and under two warp wires, and each warp wire passes over and under two weft wires. The wire diameter for both(warp and weft)is mostly the same.

Characteristics: square aperture, less rigid than plain weave, especially suitable for deforming, strong wire cloth due to ratio of wire diameter and aperture, it is mostly used for filtration less than 63 µm.

Material

1. Pure Nickel,

2. Nickel Chrome alloy: Cr20Ni80 Cr30Ni70 Cr15Ni60 Cr20Ni35 Cr20Ni30

3. Nickel Copper alloys: Monel, Ni70Cu30, Ni90 Cu10, etc.

4. Incoloy Inconel

5. Fe-C r-Al Alloy

6. Pure Tungsten, Pure Molybdenum, Pure Titanium.

7. Pure Silver

Applications:

1. Diagonally seamed, non-marking, cylinder mould covers, thickeners, breast roll covers, extractor and couch rollers

2. Phosphorbronze wires for banknotes and security papers

3. Conveyor belts for washers, dryers and sludge presses

4. Mixed wire cloth (polyester/stainless steel) for production of nonwovens

5. Diagonally seamed dandy roll covers for fine and cigarette papers

6. Press wires for the hardboard industry

Twill Weave mesh Specification

 Sizes and specifications can be as your design

Special specifications can be produced by the customer's requirements.