China Anping Jiechang Wire Mesh Products Co.,LTD latest company news about Plain Weaving Mesh

Plain Weaving Mesh

December 3, 2013

Plain Weaving Mesh

latest company news about Plain Weaving Mesh 0

Each weft wire passes over one and under one warp wire, and each warp wire passes over one and under one weft wire, every weft wire have and warp wire the same diameter. Fabric shall be formed by spacing the main and cross wires at a right angle.

When the entire main and cross wires are parallel and equally intervals, the mesh forms a square, and, when the width is different, it becomes rectangular.

Meanwhile, production of plain weave up to the same wire gauge as open mesh is theoretically possible. But use of wire gauge about 80% of open mesh is optimum due to changes in structure at the time of weaving.

Wire Mesh Specification Chart
	Mesh	Gauge	Wire Diameter in mm	Aperture in Microns	Weave	Open Area
1	8	24	0.558	2617	Plain	67.94
2	8	26	0.457	2718	Plain	73.28
3	8	27	0.400	2775	Plain	76.39
4	8	28	0.376	2799	Plain	77.72
5	10	24	0.558	1982	Plain	60.89
6	10	26	0.457	2083	Plain	67.25
7	10	28	0.376	2164	Plain	72.59
8	12	24	0.558	1559	Plain	54.23
9	12	26	0.457	1660	Plain	61.48
10	12	27	0.400	1717	Plain	65.78
11	12	28	0.376	1741	Plain	67.63
12	12	30	0.315	1802	Plain	72.45
13	12	30.5	0.300	1817	Plain	73.66
14	14	24	0.558	1256	Plain	47.95
15	14	26	0.457	1357	Plain	55.97
16	14	27	0.400	1414	Plain	60.77
17	16	27	0.400	1188	Plain	55.96
18	16	28	0.376	1212	Plain	58.24
19	16	30	0.315	1273	Plain	64.25
20	16	30.5	0.300	1288	Plain	65.78
21	16	26	0.457	1131	Plain	50.71
22	18	26	0.457	954	Plain	45.72
23	18	28	0.376	1035	Plain	53.81
24	20	26	0.457	813	Plain	40.98
25	20	28	0.376	894	Plain	49.55
26	20	30	0.315	955	Plain	56.55
27	20	30.5	0.300	970	Plain	58.34
28	20	32	0.274	996	Plain	61.51
29	20	32.5	0.264	1006	Plain	62.75
30	24	30	0.315	743	Plain	49.33
31	24	30.5	0.3	758	Plain	51.34
32	24	32	0.274	784	Plain	54.92
33	24	32.5	0.264	794	Plain	56.33
34	24	36	0.193	865	Plain	66.85
35	28	30	0.315	592	Plain	42.61
36	28	30.5	0.300	607	Plain	44.80
37	28	32	0.274	633	Plain	48.71
38	28	32.5	0.264	643	Plain	50.26
39	30	30	0.315	532	Plain	39.43
40	30	30.5	0.300	547	Plain	41.69
41	30	32	0.274	573	Plain	45.75
42	30	32.5	0.264	583	Plain	47.36
43	30	34	0.234	613	Plain	52.36
44	35	32	0.274	452	Plain	38.74
45	35	32.5	0.264	462	Plain	40.48
46	35	34	0.234	492	Plain	45.91
47	35	36	0.193	533	Plain	53.88
48	35	37	0.173	553	Plain	58.01
49	36	32	0.274	432	Plain	37.41
50	40	32	0.274	361	Plain	32.32
51	40	32.5	0.264	371	Plain	34.14
52	40	33	0.254	381	Plain	36.00
53	40	34	0.234	401	Plain	39.88
54	40	36	0.193	442	Plain	48.45
55	40	37	0.173	462	Plain	52.93
56	40	38	0.152	483	Plain	57.86
57	42	38.5	0.140	465	Plain	59.06
58	50	34	0.234	274	Plain	29.09
59	50	36	0.193	315	Plain	38.45
60	50	38	0.152	356	Plain	49.11
61	60	34	0.234	189	Twill	20.00
62	60	36	0.193	230	Plain	29.60
63	60	37	0.173	250	Plain	34.97
64	60	38	0.152	271	Plain	41.08
65	80	38	0.152	166	Twill	27.17
66	80	38.5	0.140	178	Plain	31.25
67	80	40	0.122	196	Plain	37.91
68	80	42	0.102	216	Plain	46.07
69	80	43	0.091	227	Plain	50.89
70	93	41	0.112	161	Plain	34.80
71	100	41	0.112	142	Plain	31.25
72	100	42	0.102	152	Plain	35.81
73	100	43	0.091	163	Plain	41.18
74	100	44	0.081	173	Plain	46.39
75	100	45.5	0.063	191	Plain	56.55
76	120	43	0.091	121	Plain	32.50
77	120	44	0.081	131	Plain	38.11
78	120	45	0.070	142	Plain	44.80
79	120	45.5	0.063	149	Plain	49.33
80	140	45	0.070	111	Plain	37.72
81	150	45	0.070	99	Plain	34.41
82	150	45.5	0.063	106	Plain	39.43
83	150	47	0.050	119	Plain	49.66
84	170	45.5	0.063	86	Plain	33.45
85	170	47	0.050	99	Plain	44.27
86	200	47	0.050	77	Plain	36.76
87	240	47	0.050	56	Plain	27.83
88	250	48	0.040	62	Plain & Twill	36.76

Special specifications can be produced by the customer's requirements.