Dutch Weave Mesh
December 3, 2013
Dutch Weave Mesh
woven as a plain weave. Each warp wire and each weft wire passes over and under the next adjacent complementary wire, as in normal Plain Weave, except the warp wires are larger in diameter than the weft wires. This allows a greater mesh count in the weft direction.
Characteristics: "zero"-aperture, more solid than square or rectangular mesh, relative high open area, suitable for all kinds of filtration.
Material
1. Pure Nickel,
2. Nickel Chrome alloy: Cr20Ni80 Cr30Ni70 Cr15Ni60 Cr20Ni35 Cr20Ni30
3. Nickel Copper alloys: Monel, Ni70Cu30, Ni90 Cu10, etc.
4. Incoloy Inconel
5. Fe-C r-Al Alloy
6. Pure Tungsten, Pure Molybdenum, Pure Titanium.
7. Pure Silver
Applications:
1. Diagonally seamed, non-marking, cylinder mould covers, thickeners, breast roll covers, extractor and couch rollers
2. Phosphorbronze wires for banknotes and security papers
3. Conveyor belts for washers, dryers and sludge presses
4. Mixed wire cloth (polyester/stainless steel) for production of nonwovens
5. Diagonally seamed dandy roll covers for fine and cigarette papers
6. Press wires for the hardboard industry
Dutch Weave Specification
Mesh Count |
Wire Dia mm |
Wire Dia inch |
Micron |
8 x 85 |
0.360 x 0.320 |
0.0140 x 0.0125 |
320-340 |
12 x 64 |
0.580 x 0.420 |
0.0230 x 0.0165 |
265-285 |
14 x 88 |
0.500 x 0.350 |
0.0200 x 0.0140 |
215-235 |
20 x 250 |
0.250 x 0.215 |
0.0100 x 0.0085 |
70-90 |
24 x 100 |
0.350 x 0.250 |
0.0140 x 0.0100 |
115-125 |
30 x 150 |
0.230 x 0.180 |
0.0090 x 0.0071 |
95-100 |
40 x 200 |
0.180 x 0.140 |
0.0070 x 0.0055 |
70-75 |
40 x 400 |
0.180 x 0.140 |
0.0071 x 0.0055 |
90-110 |
50 x 250 |
0.140 x 0.114 |
0.0055 x 0.0045 |
55-60 |
50 x 500 |
0.140 x 0.114 |
0.0055 x 0.0045 |
70-90 |
50 x 600 |
0.140 x 0.090 |
0.0055 x 0.0035 |
60-70 |
80 x 400 |
0.125 x 0.071 |
0.0050 x 0.0028 |
40-45 |
80 x 700 |
0.100 x 0.080 |
0.0040 x 0.0032 |
45-55 |
100 x 800 |
0.100 x 0.070 |
0.0040 x 0.0028 |
36-38 |
120 x 1000 |
0.080 x 0.053 |
0.0031 x 0.0021 |
27-29 |
165 x 800 |
0.070 x 0.053 |
0.0027 x 0.0021 |
24-26 |
165 x 1400 |
0.070 x 0.040 |
0.0027 x 0.0016 |
16-18 |
270 x 2000 |
0.350 x 0.028 |
0.0014 x 0.0011 |
9-10 |
325 x 2400 |
0.035 x 0.025 |
0.0014 x 0.0010 |
4-5 |
Sizes and specifications can be as your design
Special specifications can be produced by the customer's requirements.